1600℃ High-Temperature Lifting Furnace | Bottom-Opening Lifting Type Furnace

1600℃ High-Temperature Lifting Furnace

This 1600℃ high-temperature lifting furnace adopts a bottom-opening lifting structure. The equipment uses a high-performance corundum-mullite furnace and an 1800-type silicon molybdenum rod heating system, which can heat up quickly, provide a uniform temperature field, and operate stably for a long time.
The furnace employs a double-layer air-cooled furnace body structure, combined with an intelligent PID programmable temperature control system, achieving automatic heating, automatic heat preservation, and automatic cooling control. The equipment is widely used in ceramics, metallurgy, electronics, glass, chemicals, machinery, refractory materials, new materials, and scientific research laboratories.
The bottom-opening electric lifting platform design facilitates loading and unloading materials at high temperatures, effectively improving experimental safety and operational efficiency.

Product Features (High Temperature Lifting Furnace)

1. Bottom-opening door structure for convenient and safe loading

This high-temperature lifting furnace adopts a bottom-opening door design with an electrically raised loading platform, facilitating convenient loading and unloading. The loading speed is adjustable from 5-30 seconds, and the loading load capacity is 50kg. The furnace opening and loading platform refractory materials are fitted with a stepped, cross-sealed design. The refractory material has angles at both the top and bottom, with the opening angle of the loading platform increasing and gradually decreasing as the platform closes, resulting in excellent sealing performance.

2. Corundum mullite furnace lining for high temperature and rapid heating/cooling resistance

The furnace lining is made of corundum mullite material, which is resistant to high temperatures and rapid heating/cooling, exhibiting good thermal stability. The furnace dimensions are 300×300×300mm, suitable for small to medium batch high-temperature sintering processes.

3. Adjustable Heating Rate, Maximum 15℃/min

The heating rate can be freely adjusted from 1℃/h to 15℃/min, allowing users to flexibly set the heating speed according to different materials and process requirements.

4. Complete Intake and Exhaust System

A 30mm diameter ceramic exhaust port is located at the top of the furnace to promptly remove smoke, dust, and reaction waste gases. Two suspended ball flow meters are provided, allowing the introduction of a protective atmosphere to meet the atmospheric requirements of different processes.

5. Touchscreen Temperature Curve Setting

The touchscreen allows for setting temperature curves, providing intuitive and convenient operation. Real-time display of parameters such as temperature, temperature range number, time interval, remaining time, output power percentage, voltage, and current is provided.

Parameter	Specification
Temperature	1600℃
Voltage AC	380V
Power	15KW
Chamber Size (mm)	300×300×300
Temperature Control Accuracy	±1℃
Temperature Uniformity in Chamber	±1℃ (depends on heating chamber size)
Temperature Sensing Element & Range	Platinum-Rhodium B Thermocouple, range 0-1820℃
Heating Rate	Adjustable, max. 15℃/min, min. 1℃/h
Heating Element	U-shaped 1800℃ silicon molybdenum rod
Heating Element Installation Position & Method	Vertically installed around the furnace chamber
Exhaust Port	One ceramic exhaust port with 30mm diameter on top of the furnace
Gas Inlet	Equipped with two floating ball flow meters
Refractory Material	Corundum mullite material
Temperature Curve Setting	Set via touch screen
Furnace Opening & Loading Platform Refractory Coordination	Step-cross sealing with angled refractory materials; opening angle of loading platform gradually decreases as it closes
Loading Platform	Made of corundum mullite material, rises and falls for loading and unloading
Loading Lifting Speed	5-30 seconds
Loading Capacity	50kg
Lifting Mechanism	Electric mechanical
Cooling Structure	Double-layer furnace shell, air-cooled

Application Areas (High Temperature Lifting Furnace)

• Advanced Ceramic Sintering: Suitable for high-temperature sintering of high-performance ceramics such as alumina, zirconia, silicon nitride, and silicon carbide.
• Dental Ceramics: Suitable for dental ceramic processes such as zirconia crown crystallization sintering; the bottom-opening door and electrically operated lifting loading platform facilitate frequent loading and unloading.
• Powder Metallurgy: Suitable for high-temperature sintering of metal powders and alloy powders; a protective atmosphere can be introduced to prevent oxidation.
• New Material R&D: Suitable for the synthesis and heat treatment process research of new materials such as special ceramics, composite materials, high-temperature alloys, and nanomaterials.
• Aerospace Materials: Suitable for high-temperature heat treatment of key materials such as aerospace high-temperature alloys and ceramic matrix composites.

Company Profile

A professional enterprise specializing in heat treatment technology services and the R&D, manufacturing, and sales of high-temperature electric furnaces.

The company focuses on developing high-temperature electric furnaces covering a full temperature range of -100℃ to 2600℃. Its products include experimental electric furnaces, vacuum atmosphere furnaces, industrial kilns, and medium-frequency induction heating equipment. Main products include box furnaces, tube furnaces, lifting furnaces, pusher kilns, bogie furnaces, rotary kilns, tunnel kilns, and various specialized medium-frequency furnaces.

The company adheres to technological innovation and has passed ISO9001 and EU CE certifications. It owns 21 registered trademarks, 29 patents, and 27 software copyrights.

Payment Methods

TT

Shipment Methods

The electric furnace is packaged in three layers: first wrapped in foam paper, then wrapped in plastic film, and finally packed in a wooden crate.

Frequently Asked Questions (FAQ)

1. What materials is this lifting electric furnace suitable for?

Suitable for high-temperature sintering and heat treatment of ceramics, metals, new materials, glass, and refractory materials.

2. What is the load-bearing capacity of the charging platform?

The maximum load-bearing capacity of the charging platform is 50KG.

3. Is the heating rate adjustable?

It supports free adjustment, ranging from 1℃/h to 15℃/min.

4. Is the furnace safe for long-term high-temperature operation?

It adopts a double-layer air-cooled structure, with a furnace surface temperature ≤45℃, and has multiple safety protection functions.

5. Does it support automatic program temperature control?

Yes. The equipment can achieve fully automatic heating, heat preservation, and cooling operation.